Can a 282 be connected with a supercap using only a single SNAIC?
You can certainly use just one SNAIC, as if the Supercap were just a big Hi-Cap. If the question relates to a short term situation, perhaps you only have one SNAIC on hand, or don’t have a dealer nearby, it is fine to use the Supercap in that way. You will need the appropriate shorting plug for the Upgrade 2 output socket on the upper row of the 282. Long term, it would not be a good idea to use a Supercap in this way with a 282 as you would not be getting the best out of the equipment you have in your hands.
3 Likes
Without this, you will only power one channel.
1 Like
Thank you all. Is this the standard plug that comes with the 282 that I need? Im selling my hicap pending an upgrade to 252 so it’s only temporary.
Yup. Same plug as was there when used with HiCap.
2 Likes
Its the plus which ‘should’ have come with your 282. Best to check… 
1 Like
Do exactly as you would with a Hicap. Just connect the Snaic to Supercap Output 1 instead of Hicap Socket 4.
1 Like
Thanks. All connected and working using a single SNAIC pending the 252 upgrade.