# 282 + SN2 - no sound?

**URL:** <https://community.naimaudio.com/t/282-sn2-no-sound/31258>\
**Category:** Hi-Fi Corner\
**Created:** [October 12, 2023, 6:02pm UTC](https://community.naimaudio.com/t/282-sn2-no-sound/31258 "2023-10-12T18:02:13Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![GeoffC](https://community.naimaudio.com/user_avatar/community.naimaudio.com/geoffc/32/484909_2.png) [@GeoffC](https://community.naimaudio.com/u/GeoffC)\
**Post date:** [October 13, 2023, 8:48am UTC](https://community.naimaudio.com/t/282-sn2-no-sound/31258/9 "2023-10-13T08:48:33Z")

</div>

@corsuse Information from the FAQ section linked here below - but try to leave it on all the time for a more consistent performance.

> [@Power on and power off sequence](https://community.naimaudio.com/t/power-on-and-power-off-sequence/75):
>
> To avoid lots of clicks and thumps through your speakers, Naim recommend the following power on and power off sequence: Power ON: Sources Power supplies/Pre Amp Power Amp Power OFF: Power Amp Power supplies/Pre Amp Sources Note that the power amp may emit a thump at switch on or switch off but any additional thumps and clicks will be minimised by following the above procedure

---

_[View the full topic](https://community.naimaudio.com/t/282-sn2-no-sound/31258)._