Adding a power amp to Naim Nova

[Fizzgog]

Hi guys , I’m intending on adding a power amp to my Naim Nova but am unsure of the best way to connect it up
Initially I was thinking about using xlr connections but the nova only has one socket , whereas the power amp (Nad m23) has two
I don’t think i can use interconnects to connect the power amp to the nova as my subs are connected to the Nova that way
Any ideas guys?
Thanks for your time
Pete

[Klout10]

Hi @Fizzgog - the Nova has 2 ‘Single Ended’ outputs on the back which would perfectly connect to the NAD M23 if you ask me. The Outer output is not a balanced one, but is a DIN output, merely used for Naim Power amplifiers.

[Fizzgog]

Hi mate , thanks for the reply.
I’m using the single ended connections for my subs currently . If I were to use those connections for the M23 , how would you recommend i connect the sub(s)?
Ty again , pete

[Klout10]

Unfortunately, I do not have any experience with connecting subs … a quick search on the forum might help you:

Uniti Nova REL subwoofer connection

What is the best way to connect a REL subwoofer such as T series to the Nova? Nova has 2 preamp outs and REL prefers highlevel outputs via Speakon connector. I have read many opinions on forums, and frankly quite confused what’s the right way. Appreciate help please. Thanks! Opinions: Nothing should be plugged into preamp-out. Highlevel-out is not recommended for Naim. Use splitter to merge L+R preamp-out and plug into low-level-input but that effectively shorts L&R on Naim. Bass always come …

Nova connection to a subwoofer

I have a Nova and I have purchased a subwoofer. What connection would deliver the best sound? Connecting the left and right analogue RCA outputs to the RCA left and right line level inputs on the sub? Or a single cable RCA connection from the Nova to the sub? Are the outputs on the Naim both mono? If so, in effect is there is no benefit connecting both outputs to two inputs on the sub? In which case just connect a single cable from the Nova to the sub?

[HungryHalibut]

You can connect the sub to the RCAs and the NAD to the din, using an appropriate lead. Bear in mind that adding a power amp to a Nova may not improve things, so try before you buy.