# Naca5 polarity

**URL:** <https://community.naimaudio.com/t/naca5-polarity/6243>\
**Category:** Hi-Fi Corner\
**Created:** [January 26, 2020, 6:41pm UTC](https://community.naimaudio.com/t/naca5-polarity/6243 "2020-01-26T18:41:35Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Luc](https://community.naimaudio.com/letter_avatar_proxy/v4/letter/l/9dc877/32.png) [@Luc](https://community.naimaudio.com/u/Luc)\
**Post date:** [January 26, 2020, 6:41pm UTC](https://community.naimaudio.com/t/naca5-polarity/6243/1 "2020-01-26T18:41:35Z")

</div>

I’ve read some posts here and in other forums that NACA5 polarity can be determined by “small ridge”.

Small ridge = red plus  
No ridge = black minus

Does anybody have official information from Naim that confirms this? I’m asking because I’ve found some photos of NACA5 which are terminated opposite - with “black minus” on ridge side.

---

<div class="post-metadata">

**Author:** ![Klout10](https://community.naimaudio.com/user_avatar/community.naimaudio.com/klout10/32/84921_2.png) [@Klout10](https://community.naimaudio.com/u/Klout10)\
**Post date:** [January 26, 2020, 7:03pm UTC](https://community.naimaudio.com/t/naca5-polarity/6243/2 "2020-01-26T19:03:57Z")

</div>

Good practice is that the ‘plus’ or ‘positive’ is usually marked on the cable … if these two are mixed-up, I don’t really see an issue with sound quality however.

---

<div class="post-metadata">

**Author:** ![ChrisSU](https://community.naimaudio.com/user_avatar/community.naimaudio.com/chrissu/32/77_2.png) [@ChrisSU](https://community.naimaudio.com/u/ChrisSU)\
**Post date:** [January 26, 2020, 11:13pm UTC](https://community.naimaudio.com/t/naca5-polarity/6243/3 "2020-01-26T23:13:17Z")

</div>

The only reason for the ridge is to make it easier to make the correct connection at both ends. The convention is to use the ridged side as positive, but if you use it as the negative, that’s fine, as long as you do the same at both ends.

---

<div class="post-metadata">

**Author:** ![SamS](https://community.naimaudio.com/user_avatar/community.naimaudio.com/sams/32/417_2.png) [@SamS](https://community.naimaudio.com/u/SamS)\
**Post date:** [January 26, 2020, 11:51pm UTC](https://community.naimaudio.com/t/naca5-polarity/6243/4 "2020-01-26T23:51:00Z")

</div>

This was taken from an old Naim speaker manual.

“Finally the amplifier output speaker cables, with their  
custom Naim plugs, should be connected to the input  
sockets on the back of the Passive Crossover Units.  
Ensure that each positive plug - identified by a rib on the  
side of the cable and a tag marked “pos” on the side of  
the connector body - is inserted to the red input sockets.”

---

<div class="post-metadata">

**Author:** ![Mike\_S](https://community.naimaudio.com/user_avatar/community.naimaudio.com/mike_s/32/290893_2.png) [@Mike\_S](https://community.naimaudio.com/u/Mike_S)\
**Post date:** [January 27, 2020, 12:21am UTC](https://community.naimaudio.com/t/naca5-polarity/6243/5 "2020-01-27T00:21:42Z")

</div>

As this, I was connecting one the other day in a second system and my dealer confirmed this, ridged edge is positive and there is “POS” on the clamp plug if fitted.

---

<div class="post-metadata">

**Author:** ![Luc](https://community.naimaudio.com/letter_avatar_proxy/v4/letter/l/9dc877/32.png) [@Luc](https://community.naimaudio.com/u/Luc)\
**Post date:** [January 27, 2020, 1:41am UTC](https://community.naimaudio.com/t/naca5-polarity/6243/6 "2020-01-27T01:41:01Z")

</div>

> [@ChrisSU](#):
>
> The convention is to use the ridged side as positive, but if you use it as the negative, that’s fine, as long as you do the same at both ends.

That’s not true. Naca5 has directionality – and that’s the reason it should have strictly fixed “+” and “-“ meanings. Otherwise directionality will be reversed.

So it seems ridged side is “positive+”.

Thanks to everyone.

---

<div class="post-metadata">

**Author:** ![Luc](https://community.naimaudio.com/letter_avatar_proxy/v4/letter/l/9dc877/32.png) [@Luc](https://community.naimaudio.com/u/Luc)\
**Post date:** [January 27, 2020, 1:43am UTC](https://community.naimaudio.com/t/naca5-polarity/6243/7 "2020-01-27T01:43:45Z")

</div>

> [@SamS](#):
>
> Ensure that each positive plug - identified by a rib on the  
> side of the cable

Thanks, this is what I was looking for 🙂

---

<div class="post-metadata">

**Author:** ![system](https://d2ikyu8xyuibjx.cloudfront.net/original/1X/26b5e4ef7e37d3771c473a6a1f688186c20823ac.png) [@system](https://community.naimaudio.com/u/system)\
**Post date:** [March 27, 2020, 1:43am UTC](https://community.naimaudio.com/t/naca5-polarity/6243/8 "2020-03-27T01:43:46Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.
