# NC 222 Eror Message

**URL:** <https://community.naimaudio.com/t/nc-222-eror-message/46066>\
**Category:** Streaming Audio\
**Created:** [October 23, 2026, 4:26pm UTC](https://community.naimaudio.com/t/nc-222-eror-message/46066 "2026-10-23T16:26:56Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mint](https://community.naimaudio.com/user_avatar/community.naimaudio.com/mint/32/1854_2.png) [@Mint](https://community.naimaudio.com/u/Mint)\
**Post date:** [October 23, 2026, 4:26pm UTC](https://community.naimaudio.com/t/nc-222-eror-message/46066/1 "2026-10-23T16:26:56Z")

</div>

![IMG_3940](https://d2ikyu8xyuibjx.cloudfront.net/original/4X/6/0/5/605c246fc9c7b938fde168938f7aec6b7e6fac3e.jpeg)Has anyone had this come up .Press ok and goes away ?

---

<div class="post-metadata">

**Author:** ![MrFixit](https://community.naimaudio.com/user_avatar/community.naimaudio.com/mrfixit/32/304191_2.png) [@MrFixit](https://community.naimaudio.com/u/MrFixit)\
**Post date:** [October 23, 2026, 4:35pm UTC](https://community.naimaudio.com/t/nc-222-eror-message/46066/2 "2026-10-23T16:35:18Z")

</div>

No, but maybe power down, disconnect the power cord, and remove then re-fit the link plugs. Then re-connect and power up.

I’m guessing from your profile you don’t have an NPX 300 connected.

---

<div class="post-metadata">

**Author:** ![Dan\_M](https://community.naimaudio.com/user_avatar/community.naimaudio.com/dan_m/32/357819_2.png) [@Dan\_M](https://community.naimaudio.com/u/Dan_M)\
**Post date:** [October 23, 2026, 4:37pm UTC](https://community.naimaudio.com/t/nc-222-eror-message/46066/3 "2026-10-23T16:37:27Z")

</div>

As @MrFixit says take all leads out and put back in and check link plug. There is a loose connection somewhere.

That would have been my immediate thing to do!

---

<div class="post-metadata">

**Author:** ![Mint](https://community.naimaudio.com/user_avatar/community.naimaudio.com/mint/32/1854_2.png) [@Mint](https://community.naimaudio.com/u/Mint)\
**Post date:** [October 23, 2026, 9:17pm UTC](https://community.naimaudio.com/t/nc-222-eror-message/46066/4 "2026-10-23T21:17:47Z")

</div>

Thanks will give it a go tomorrow

---

<div class="post-metadata">

**Author:** ![MrFixit](https://community.naimaudio.com/user_avatar/community.naimaudio.com/mrfixit/32/304191_2.png) [@MrFixit](https://community.naimaudio.com/u/MrFixit)\
**Post date:** [October 24, 2026, 7:43am UTC](https://community.naimaudio.com/t/nc-222-eror-message/46066/5 "2026-10-24T07:43:01Z")

</div>

If no joy then speak to your Naim dealer.

---

<div class="post-metadata">

**Author:** ![indexical](https://community.naimaudio.com/letter_avatar_proxy/v4/letter/i/7ba0ec/32.png) [@indexical](https://community.naimaudio.com/u/indexical)\
**Post date:** [October 24, 2026, 7:53am UTC](https://community.naimaudio.com/t/nc-222-eror-message/46066/6 "2026-10-24T07:53:15Z")

</div>

i have had it a couple of times on my 222- i thought a momentary power cut ?- have put it into standby and wakened and everything ok