# Pairing Uniti IR remotes

**URL:** <https://community.naimaudio.com/t/pairing-uniti-ir-remotes/955>\
**Category:** Hi-Fi Corner\
**Created:** [February 14, 2019, 7:49am UTC](https://community.naimaudio.com/t/pairing-uniti-ir-remotes/955 "2019-02-14T07:49:52Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![Richard.Dane](https://community.naimaudio.com/user_avatar/community.naimaudio.com/richard.dane/32/125_2.png) [@Richard.Dane](https://community.naimaudio.com/u/Richard.Dane)\
**Post date:** [February 14, 2019, 8:02am UTC](https://community.naimaudio.com/t/pairing-uniti-ir-remotes/955/6 "2019-02-14T08:02:38Z")

</div>

From the Troubleshooting Manual…

_The remote could be set to the wrong system code. To reset the remote control to the default system code point the remote at the NaimUniti and press the following buttons at the same time: aux, Info (i) and disp._

_The remote control interferes with another product/Uniti responds to another product’s remote control_  
_• The NaimUniti remote control can be configured to work on a different remote control channel if the default channel clashes with another product’s remote control. To change the control channel point the remote at the NaimUniti and press the following buttons at the same time: aux, info (i) and one of the following:_  
_o Disp(thisisthedefaultsetting)oroneofthealternatechannels:1,2,3, 4, 5, 6, 7, 8, 9 or 0_

[https://www.naimaudio.com/sites/default/files/products/downloads/files/naimuniti\_troubleshooting\_guide\_v3-1.pdf](https://www.naimaudio.com/sites/default/files/products/downloads/files/naimuniti_troubleshooting_guide_v3-1.pdf)

---

_[View the full topic](https://community.naimaudio.com/t/pairing-uniti-ir-remotes/955)._