Atom power/stand-by problems

[Mug]

Dear all,

I have a Naim Uniti Atom with power problems.

1. It seems that it doesn’t go into standby modus but goes off instead. After this my remote doesn’t start up the system. Instead I have to push the power button on the Atom itself. It then starts up again which takes 40 seconds

2. When there’s a cd player is hooked on via the analogue in, the power of the Atom turns off after 20 minutes while playing a cd as if there is a time out.

Anyone recognizes these problems and knows how to solve them? Thanks

[robert_h]

Hu, you will need to adjust your standby settings:

Uniti Atom sleeping too soundly?

There are two standby modes: 0.5W, to achieve this the network is turned off in s/by - will not wake from app, only remote or buttons. 2W mode, Will wake from app as network is alive Try setting server mode to ‘on’. PS 2W mode costs about £0.016 per day or £6 a year to run

[Mug]

Ok, thanks! How do I change these settings?

[110dB]

Use the app to change settings

• From the app home page, press the ‘cog’ in the top right corner
• Select ‘other settings’
• From there you can set the auto-off time.
• If ‘Server mode’ is ticked it will wake faster, the network is kept alive. This mode takes 2W.

[n-lot]

OP says his remote won’t wake the unit, so I think a different issue.

[xfproductions]

You need to check settings and/or
do the reset
(as I did)

[Mug]

True, this problem has not been resolved unfortunately

[Mug]

Ok, thanks for your help!