Fault 61?

[davidhendon]

NDX fault code 61, what is the problem?

Hi marcobb0312, IIRC fault 61 is a comms error between the ARM chip on the digital PCB & the Bridgeco chip on the streaming PCB, so either a ribbon has become dislodged or you have a hardware fault. If so, it’s usually the streaming module at fault. If you want to have a look yourself, check carefully the two white ribbons that are between the small PCB on pillars & the PCB below it. (It’s the one where the Wifi aerial connects). Make sure the brown locking bars are securely pushed down & the…

This was an NDX but it will surely be the same with a Uniti 2.

The usual advice is to do a power off restart, but if that doesn’t fix it, then you are probably looking a repair.

Best

David