Naim Headline DIN to be connected with Nait 5i

[james_n]

Yes.

You’ll need an adapter wired as per the picture shown in the FAQ

How To Connect a Headphone amp to your Naim system

If you wish to connect a standard (DIN) Headline then you connect the captive DIN signal lead to one of the IN/OUT DIN inputs on a suitable Naim pre-amp or Integrated amp. The manual explains connection as follows; [Headline connection] If you have an RCA Phono Headline then you should connect to Line Out RCA Phonos, should your equipment have them, or alternatively to RCA Phono outputs on a suitable source component. Note that any Headline will require a suitable power supply to operate, ei…

The adapter DIN Female must be wired as per the diagram circled above with the left channel RCA pin connected to ch1 out and the right channel RCA pin connected to ch2 out. RCA outer (signal ground) on both RCA plugs connects to -ve.