Thanks Roger that is useful information. I noted the ports on the SCM25’s which made me wonder. I would jump at a pair of SCM40A’s as I’ve heard the passive version many times and love them. I’ll have a measure up and see what can be done for them. I suspect I can place them with a couple of feet from the back wall and the sides and maybe get them a bit further away from the listening position.
There you go…nuts have a bit of thread lock so use one of the screws in the hole in the binding post to stop it spinning… don’t do the nuts up mega tight or you may crack the plastic back plate…
Ideally I’d like to be rid of the cheap tags and solder to quality binding posts.
Not a houseboat but on the shore of Puget Sound. Powering the ATCs are NDX-2, XPS, NAC 282, NAP 250 and Supercap. Depending which way the wind’s going and because of the way sound carries across water, I need to be mindful of volume if windows are all open, especially in fishing season. Guest house w grass roof in foreground has SCM-7s driven by UnitiLite.