Boulder 3060
That’s a beast - neat enclosure for the transformers too.
The other way round - Buffalo kit’s made up of Melco parts!
I see on their homepage they make a audio grade 8 port L2 switch… for $6k. I’ll give that a miss. I do have a lot of Buffalo bits thought. Dirt cheap and fairly reliable.
One could be forgiven to think only the case and pricetags differ, at least for some of their products:
What are the odds?! I had one of those on my NDX. Of course, both are in long term storage now.
Actually the odds are quite high. Buffalo is fairly ubiquitous for affordable gear in Japan. My keyboard and mouse are even made by them.
Audiolab 8200CD ;-
Phillips CD880 ;-
Marantz CD85 ;-
Marantz CD7300;-
Micromega Stage 3 ;-
Marantz CD4000 ;-
Marantz CD4000 OSE ;-
Naim CD3.5 ;-
Flux Capicitor?
Can’t get over the sheer number of capacitors in the Audiolab.
I think Exposure are similar in preferring lots of small capacitors rather than one or two large capacitors. Looks like a lot more work, to me anyway.
Particularly when the smoothing bank bulge and fail as mine did…
Only in their pre amps I believe (3010 S2 / 5010) and the 3010 and series CD players.
The amps and intergraded amps have a pair of large smoothing capacitors
Also I have not looked inside the 2510 or the XVM series
Me too; replacing those caps would be a little more time consuming than one or two large caps when the time comes!
B.M.C CS3 integrated has capacitors double stacked, photo shows the top deck ‘folded out’ just to show lower deck! Not how it normally looks!
Quirky looking thing
Imagine recapping that!
It looks like soviet architecture.